|
Searched The Old-House-Friends Forums for "turnings"
|
Found 9 matches
|
|
<< Previous 10
| Viewing 1 - 9 of 9
| Next 10 >>
|
|
|
|
|
|
there should be a screw/bolt on the backside of the mill where the hose comes up from the pump. turning this in (clockwise) wil slow the flow.
|
|
read more
|
|
|
|
|
|
|
I just redone a brass bed last year, I used the tarnish remover for brass from CVS drug store, also used brasso. it took alot of rubbing though. the bed is gorgeous. you can buy stuff in a spray can to keep it from turning .
|
|
read more
|
|
|
|
|
|
|
Where can I find a Grass 1000 Hinge or what can directly replace it without modification to existing cabinet? The existing hinges have the front adjusting screw backed out all the way and now the screw threads will not re-engage back into the adjusting plate when turning clockwise direction. Thank y...
|
|
read more
|
|
|
|
|
|
|
I found an unusual doorbell on EBAY, and was outbid at the last minute. Now Im obsessed with finding another just like it. It is an old brass doorbell with the usual bell which mounts to the inside of the door, but on the outside is a small brass crank of sorts with a tiny porcelain knob. So the bel...
|
|
read more
|
|
|
|
|
|
|
The Creator Inc. rain lamp takes one quart of light or regular mineral oil. I doubt if the pump can pump the heavy medicinal type. There are 3 screws on the bottom of the fixture. Hang the lamp on a hook, set a regular utility plastic bucket under it. Remove the three screws while holding the bottom...
|
|
read more
|
|
|
|
|
|
|
I had a 1 and 1/2 thick carrera marble surround installed on a fireplace by a marble vendor. The marble piece over the top of the fireplace opening has cracked and is slowly shattering. The marble on both sides of the crack is discoloring and turning brown. The company who installed the surround cli...
|
|
read more
|
|
|
|
|
|
|
I have a 1919 home. It has had many additions by some wanna-be carpenter! Plans where just to remodel the kitchen. AS I started to remove some old trim, the walls didnt seem straight anymore. When I removed the ceiling fan a big pulge was noted in the ceiling leading up to, way more problems than ev...
|
|
read more
|
|
|
|
|
|
|
There are several methods anyone can use to clean up or strip old hardware. These methods fall into two catagories: Wet and dry. Let me start with the WET methods: Wet methods almost always require reactive solvants. Not every solvant is some nuclear solution in a hazmat drum that will drop through ...
|
|
read more
|
|
|
|
|
|
|
As a Historical Restoration Contractor, we often run into problems with older homes that someone has done work on, that just didnt turn out quite like they had hoped and then they put the place up for sale and the next owner calls us and says fix it. Most of the time it turns out that it was a poor ...
|
|
read more
|
|
|
|
|
<< Previous 10
| Viewing 1 - 9 of 9
| Next 10 >>
|
|
|
Searched The Old-House-Friends Forums for "turnings"
|
Found 9 matches
|
|
|
